 |
Pre-Cut Kit for AcoustiCase™ C6607 (AP C6607)
This pre-cut kit comes with the AcoustiCase™ C6607, and is
also available separately. The kit fits a number of similar cases
such as the Antec SLK 3700 AMB, and the Compucase 6A19.
Antec SLK3700AMB
The AP C6607 kit fits this case well, except
for the shaped air filter, which is not useable.
For full details see the review from SPCR below. |
|
 Compucase
6A19 (or LX-6A19)
The kit fits this case well, including the washable air filter
for the front air intake.
 The
case is very similar to the AC C6607, except for the rear
case panel and the fan grill design. Therefore, the rear acoustic
composite piece may not fit certain LX-6A19 case models (there
are variations in the case design), and may require some modification.
|
About the AP C6607 Acoustic Materials Kit
The acoustic materials
kit is comprised of no less than 17 parts including; pre-cut 7mm
self-adhesive acoustic composite parts for lining all four internal
walls (including the complete side panel behind the motherboard),
and acoustic foam blocks for unused drive spaces for both noise
absorption and ducting airflow over installed devices.
The kit also features a unique washable air filter, and now also
comes with soft black fan mounts (Product Code:
AFM6607B - see image right). Both these items are optional extras
- and only need installing if desired/required.
Please take care to read the fitting directions before assembling
this product. It is the responsibility of the machine builder
to position the materials appropriately to facilitate the
normal functioning of internal components.
|
top
Reviews & Feedback
AcoustiPack™ Pre-cut Kit for the AC C6607 (called
AP C6607) has been reviewed by Silent PC Review, fitted into
a similar case to the AC C6607 - the Antec SLK 3700
AMB - "The AcoustiPack C6607 damping kit works
well in the Antec SLK3700AMB case. The precut pieces fit perfectly,
and are easily applied, even in a system that has already
been built... I believe that in a resonant case, like an aluminum
case for instance, its effects would be quite dramatic. On
an already very quiet system, the improvements are more subtle,
but for those seeking to shave every last decibel of noise
from their systems, the AcoustiPack kit is worth using.
Pros
- It works
- Nicely illustrated application instructions
- Precut, no measuring or cutting needed
and all panels fit
- No odor
- Gives the case a very solid, expensive 'feel'..."
 [full
review]
|
|
|
Terms and Conditions |
|
Reviews
on this Product
Acoustic
Materials Fitting Directions